Si-tex SNS-1100 Скачать руководство пользователя страница 79

Страница: 79 / 114

$Si-tex SNS-1100 Скачать руководство пользователя страница 79$

User Manual -

5.6.4 Depth

This option is available only when Range Mode is Manual and it is disabled in Auto Range and

Bottom Lock Mode.

[MENU] + “Depth” + [ENTER]

5.6.5 Shift

This option is available only when Range Mode is Manual and it is disabled in Auto Range and

Bottom Lock Mode.

[MENU] + “Shift” + [ENTER]

NOTE

The bottom Range, Depth, Shift will apply to the currently selected frequency.

5.6.6 Bottom Range

This option is available when Range Mode is Bottom Lock.

[MENU] + “Bottom Range” + [ENTER]

5.6.7 Frequency

Allows you to choose the frequency between Auto, 50 kHz or 200 kHz when single frequency

page is selected.

[MENU] + “Frequency” + [ENTER]

5.6.8 Interference Rejection

Selects a filter to remove interference from other Fish Finders.

[MENU] + “Interf Reject” + [ENTER]

5.6.9 Sensitivity Menu

The Sensitivity menu is accessible both from the Fish Finder Setup menu and by pressing

[ENTER] when in Fish Finder pages. All settings in the Sensitivity menu are related to the

Frequency selected.

[MENU] + “Sensitivity Menu” + [ENTER]

Frequency1

ONLY in the Dual Frequency page Allows you to select the Frequency to

which the Sensitivity parameters are applied.

Gain

Allows you to control the Gain of the unit’s receiver. To see more details

on the screen, increase the receiver sensitivity by selecting a higher

gain percentage. If there is too much detail or if the screen is cluttered,

lowering the sensitivity may increase the clarity of the display.

STC

Sensitivity Time Constant: it is a time varying gain curve which attenuates

the sonar receiver gain in shallow water, increasing the gain gradually

as the depth increases. This is for the purpose of filtering out surface

clutter.

STC Length

If STC is Custom, it is possible to change the Length of the Sensitivity

Time Constant.

STC Strenth

If STC is Custom, it is possible to change the Strength of the Sensitivity

Time Constant.

Surf Noise Filter

This function implements an advanced time varying filter that allows

suppressing the surface clutter efficiently while leaving fish targets

visible.

NOTE1

The Frequency value is only displayed: to select the desired frequency see the

previous Par. 5.6.7.

Содержание SNS-1100



















































































































Результаты поиска

Содержание SNS-1100

Отзывы:

Si-tex SNS-1100, Руководство пользователя, Страница: 79 / 114

Результаты поиска

Содержание SNS-1100

Отзывы: