Si-tex SNS-1100 Скачать руководство пользователя страница 37

Страница: 37 / 114

$Si-tex SNS-1100 Скачать руководство пользователя страница 37$

User Manual -

2.9 ALARMS

The chart plotter provides alarms for various functions. You can enter the desired alarm range

for each function.

Auto Off

To set the automatic shutdown of the alarms when the alarm condition disappears.

[MENU] + "Alarms" + [ENTER] + "Auto Off" + [ENTER]

Arrival Alarm

To set an acoustic alarm to sound when the vessel is approaching the destination.

[MENU] + "Alarms" + [ENTER] + "Arrival Alarm" + [ENTER]

XTE Alarm

To set an acoustic alarm to sound when the vessel is deviating from a defined course.

[MENU] + "Alarms" + [ENTER] + "XTE Alarm" + [ENTER]

Anchor Alarm

To set an alarm to sound when the ship moves off the current ship's position location.

[MENU] + "Alarms" + [ENTER] + "Anchor Alarm" + [ENTER]

NOTE

By the time the Anchor Alarm is set the current ship's position is saved as origin

position. The alarm goes off when the ship moves away from the origin position more than the

entered alarm range.

Depth Alarm

This function is used to set an acoustic alarm automatically triggered when the depth value read

by the depth transducer is too shallow.

[MENU] + "Alarms" + [ENTER] + "Depth Alarm" + [ENTER]

HDOP Alarm

This function is used to show a warning when the received HDOP value exceeds the Alarm Limit

for more than 2 seconds. The default setting is 4 seconds.To activate the HDOP Alarm:

[MENU] + "Alarms" + [ENTER] + "HDOP Alarm" + [ENTER]

Heading Alarm

This function is used to show a warning when the HDG sentence is not received from a magnetic

sensor reading.

[MENU] + "Alarms" + [ENTER] + "Heading Alarm" + [ENTER]

Grounding Alarm

To verify potential danger to navigation such as shallow water (depth areas), intertidal areas,

land, rocks, obstructions and shoreline constructions. The maps are scanned every 10 seconds.

If any of the above objects are found, the chart plotter notifies the danger on a dedicated warning

message box. The active "Grounding Alarms" are shown in the Grounding Alarm Report page.

To activate the Grounding Alarm:

[MENU] + "Alarms" + [ENTER] + "Grounding Alarm" + [ENTER]

The chart plotter scans a sector in front of the boat. The direction is determined by the current

boat heading. You can select the length and its angle is 30 degrees. The Grounding Alarm is

switched Off by default after a Master Reset.

Grounding Alarm Range

To set the length of the sector to be detected among 0.25, 0.5, 1.0 Nm.

[MENU] + "Alarms" + [ENTER] + "Grounding Alarm Range" + [ENTER]

Содержание SNS-1100



















































































































Результаты поиска

Содержание SNS-1100

Отзывы:

Бренды по названию

Популярные бренды

Si-tex SNS-1100, Руководство пользователя

Результаты поиска

Содержание SNS-1100

Отзывы:

Бренды по названию

Популярные бренды