Si-tex SNS-1100, Руководство пользователя

Страница: 15 / 114

User Manual -
15
Language
The map information will still be displayed in the language of the official
digitalized paper chart.
Chart Language
Selects a sub-menu with two items: Language to set the language to display
chart information and Mode to define how objects are translated.
Distance Unit Selects the unit for Distance among Nm, Sm, Km.
Speed Unit Selects the unit for Speed among Kts, Mph, Kph.
Wind Unit Selects the unit for Wind among Kts, Kph, Mph, m/s, Bft.
Depth Unit Selects the unit among Ft, FM and Mt.
Altitude Unit Selects the unit among Ft, FL and Mt.
Temperature Unit
Selects the unit among °C and °F.
Time Reference
Allows switching between UTC or local time, by entering the Local Time
offset.
Daylight Saving Time Sets On/Off the Daylight Saving Time.
Time Format Selects the format for the time between 12 and 24 hours.
Date Format Selects the Date Format between MM-DD-YY (month-day-year) and DD-
MM-YY (day-month-year).
Nav-Aids
Presentation
Allows to set the Nav Aids presentation as US (Draw Nav-Aids using NOAA
symbology) or INTERNATIONAL (Draws Nav-Aids using international
symbology). When selected it affects Lights, Signals, Buoys & Beacons
display.
Keypad Beep
Enables or disables the single audio beeps emitted any time the chart plotter
keypad is pressed. If the incorrect key is pressed or the function required
cannot be executed, the chart plotter emits three beeps.
Cursor Speed Selects the Cursor Speed among Low, Medium or High in Chart page or into
menu.
Devices
Allows to setup the devices that needs a dedicated port as C-Com, BBFF
50/200, Radar
1
and AIS 38400.
Simulation Mode Allows to setup the simulation data before use the Simulation function
The possible selections are listed in the table below:
NOTE1
Available For SNS 700e/SNS 700i/SNS 700fe/SNS 700fi/SNS 1100