Si-tex SNS-1100 Скачать руководство пользователя страница 38

Страница: 38 / 114

$Si-tex SNS-1100 Скачать руководство пользователя страница 38$

- User Manual

Grounding Alarm Report

To display the report of the dangerous objects currently detected.

[MENU] + "Alarms" + [ENTER] + "Grounding Alarm Report" + [ENTER]

When any of the searched objects is found in the scanned area, a tick marker is printed on the

relative box to identify which dangerous objects have been currently detected. Once the alarm

condition is no longer present, the relative tick marker is removed.

NOTE

The alarm "No data available" is shown when no specific cartographic data are found

on the DATA MEDIA or when no DATA MEDIA is inserted.

SNS 700e/SNS 700i/SNS 700fe/SNS 700fi/SNS 1100:

External Alarm

When any alarm condition occurs the pin is switched from High Impedance to ground. This

signal can be used by an external device (as a hooter or buzzer).

[MENU] + "Alarms" + [ENTER] + "External Alarm" + [ENTER]

2.10 USER MEDIA: Save & Load Menu

The chart plotter allows to back up Marks, Routes and Tracks to a USER MEDIA. You can also

restore the data to internal memory at a later time. This allows virtually unlimited storage. The

USER MEDIA data storage is organized as a file system.

USER MEDIA page

To display the content of a USER MEDIA inserted into the MEDIA slot of your chart plotter:

[MENU] + "Save & Load" + [ENTER]

Formatting USER MEDIA

In order to be able to use a new USER MEDIA you must format it first. This operation prepares

the USER MEDIA to receive and store information:

[MENU] + "Save & Load" + [ENTER] + [Media] + [Format]

NOTE

When a USER MEDIA is formatted, all data saved on it will be deleted.

Fig.2.10 - User MEDIA Menu

Saving File on USER MEDIA

[MENU] + "Save & Load" + [ENTER] + [Save] + select the file type to be added by using related

soft key + insert the file name and type + [ENTER]

When a certain type of data (Mark, Events, Route, Track) is saved, a new file is created on a

USER MEDIA. The file contains all points of the selected type currently stored in the internal

memory.

• Save Marks:

to create a new file containing all Marks stored in the chart plotter

• Save Events:

to create a new file containing all Events stored in the chart plotter

• Save Routes:

to create a new file containing all Waypoints belonging to the selected

Содержание SNS-1100



















































































































Результаты поиска

Содержание SNS-1100

Отзывы:

Бренды по названию

Популярные бренды

Si-tex SNS-1100, Руководство пользователя

Результаты поиска

Содержание SNS-1100

Отзывы:

Бренды по названию

Популярные бренды