30
1.3 Electric safety directions
• When installing, repairing, or servicing the heater it must
be turned off and disconnected from power. Before
installation, please check if the heater is free of damages.
• If the heater or the power cord is damaged in any form do
NOT use the heater and contact your SHX dealer for repair
or replacement. Repairs, maintenance or any changes must
be carried out by an authorized SHX dealer.
• DO NOT attempt to repair the heater by yourself, this will
void your warranty.
• If the heater has been dropped do NOT operate it and
contact your SHX dealer to make sure it is free of any
damages.
• This heater is designed to operate at 230V, 50Hz AC. If
your supply mains do not comply with this, do NOT use the
heater.
• the heater must not be located immediately below a
socket-outlet
• WARNING: The glass heater must not be used if the glass
surface is damaged.
• WARNING: Do not use this heater in small rooms when
they are occupied by persons not capable of leaving the
room on their own, unless constant supervision is provided.
