42
Please note that this heater only
works with 2.4 GHz WI-FI networks. It does not currently support 5 GHz networks. Also,
make sure that your internet router has enough capacity to add a new device.
Step 3:
Wait till the connecting status shows 100% to finish the settings, and the WI-FI signal on
the control box will stop flashing.
If no connection could be established, switch off the heater and power it back on again after a few
seconds. Press and hold the WI-FI button on the control box until the WI-FI symbol is flashing
slowly, and then repeat the connection process.
Note:
The developers of the app are constantly striving to improve the app, meaning that
changes in the operation may occur. You can use the QR code shown below to
download the latest version of the WI-FI app.
Disconnecting the WI-FI connection
To disconnect the WI-FI of your current heater, press and hold the WI-FI button for 5 seconds
until the WI-FI indicator begins flashing again. Now the heater can be operated manually, without
having to establish a connection to Wi-Fi
.
Cleaning and maintenance
Keep the heating panel clean. Before cleaning or performing maintenance, switch the appliance
off, remove the plug from the socket and allow to cool.
Clean the outside of the heating panel regularly with a dry or very slightly moistened cloth. Do not
use any abrasive soap, spray, detergents or scouring agents, wax, glazing agents or other
chemical solutions. Dust can be removed from the rear of the appliance with a duster. To clean
the back of the appliance thoroughly, unscrew the heating panel from the wall.
