Seite
28
von
32
SAFETY MEASURMENTS
The SHX panel is equipped with protective devices that protect the device and are
designed to prevent a fire.
Please note that neither mechanism is an auto stop or other comfort function. Always
switch the device off, pull out the mains plug and wait until the heater cools down before
you move, clean or store the device.
OVERHEATING PROTECTION
If there is any risk of overheating (e.g. cover of the device, mains overload ... ..), the built-in
overheating protection switches the device off.
As soon as the device cools down, the device automatically switches on and continues as
before.
CLEANING INSTRUCTIONS
Before cleaning the device, switch off the heater, pull out the mains plug and then wait
until the device has completely cooled down.
Clean the panel with a soft, moderately damp cloth and then wipe it with a dry cloth.
WARNING
Allow the device to cool down completely, before cleaning it
WARNING
Do not dip the device in water or splash it with any other liquid.
Do not use gasoline, alcohol or solvents for cleaning the device.
Do not spray insecticides or similar means on the device.
Do not use the device in rooms with high humidity.
DO NOT COVER THE DEVICE – RISK OF FIRE!
ACTIVITIES AT THE BEGINNING / END OF THE SEASON
At the end of the season
Check whether the panel, the power supply cable and the socket are in good condition
and undamaged.
Follow the installation and safety instructions carefully.
At the beginning of the season
If you want to leave the device mounted on the wall, pull out the plug and store the
cable carefully.
While the panel is not connected to the electrical mains, you can cover the panel.
If you want to remove the device from the wall, first carefully remove the covers of the
screws and then the screws.
