Seite
22
von
32
PRE – INSTALLATION
1. Open the box and remove the device.
2. Remove the packaging completely from the device.
3. Then check the device for damage.
4. Carefully unwind the power cord, also paying attention to damage.
5. You can use the SHX convector both as a
free-standing device
and as a
wall heater.
Please proceed as follows:
STANDING DEVICE
1. Place the two feet on the floor, making sure that
the slots are parallel to each other.
Now place the panel in the slots provided in the
feet, which must be at least 12cm from the outer
edge.
2. Now screw the panel with the feet using
the supplied screws.
WALL HEATER
1.
Hold the panel against the wall and markt he four
positions trough the holes.
2. Drill the holes with a drilling machine.
