Seite
24
von
32
DESCRIPTION OF THE DISPLAY AND CONTROL PANEL
1.
Indicator WIFI
2.
Indicator CHILD LOCK
3.
Indicator ECO-MODE
4.+ 5. Indicator SET TEMPERATURE
6.
Indicator ON/OFF
7.+ 8. Indicator ROOM TEMPERATURE
9.
Button ON/OFF
10.
Button SET/WIFI
11.
Button INCREASE
12.
Button DECREASE
13.
Button CHILD LOCK
SET THE FUNCTIONS
Please press the ON / OFF switch on the side of the device to put the panel in an
operational mode. "OF" lights up on the display - this means that the device is in
standby mode.
1. TURN ON
To switch on the device, press the
button on the control panel - the "ON" indicator appears
on the display.
The set standard temperature of the panel is 25 ° C. If the ambient temperature is below it at
the time of switching on, the device starts to heat automatically.
If the room temperature is higher, you must set the desired temperature (see 2. Heating
function).
NOTE
Never switch off the heating panel by pulling the plug directly from the mains.
Always press the
button first and then the ON / OFF switch before disconnecting the
device from the mains.
2. HEATING-FUNCTION
1. Switch on the device using the
button.
2. You will now see the
standard display
on the display. (ON and room temperature
display).
3. To start the heating function, press the
button once
the “ST” display starts to
flash.
4. Use the
buttons to set the desired temperature (up to 37C °).
5.
Approx. 10 seconds after your input, the panel automatically saves the setting and now
starts to heat.
NOTE
If the set temperature is lower than the current room temperature, the device does not heat.
