Shuttle XPC SD11G5, Руководство пользователя

Страница: 27 / 73

18
English
Note : 1. Maximum installable memory is 2GB.
2. Double-side X16 DDR2 chips are not supported.
3. Registered DIMMs are not supported.
4. Only unbuffered without ECC DIMM are supported.
5. Does not support X4 DDR2.
Note : No jumper settings are required to configure memory.
The system BIOS utility automatically detects the memory settings.
Check the total installed system memory value in the BIOS menu.
TOTAL 2 DIMM in Single or Dual Channel Mode
up to 2GB and 1GB per DIMM
Density 256 Mbit 512 Mbit 1024 Mbit
Device Width X8 X16 X8 X16 X8 X16
Single Side 256MB 128MB 512MB 256MB 1024MB 512MB
Double Side 512MB N/A 1024MB N/A N/A N/A
4. Fasten the Smart Fan to the chassis with the four thumbscrews.
<
2.3 DDR2 Installation
Memory Configuration : Install memory in any or all of the banks according to the
combinations shown below.