All CPUs have completely been tested, and values offered by the worst EMI combination of
CPU external frequency are listed as follows:
Test Mode
External Frequency
CPU
CPU Open/Close
1
533MHz
Pentium M 2.0GHz
Close
2
533MHz
Pentium M 2.0GHz
Open
3
400MHz
Pentium M 1.7GHz
Close
4
400MHz
Pentium M 1.7GHz
Open
5
400MHz
Celeron M 1.5GHz
Close
6
400MHz
Celeron M 1.5GHz
Open
(C) Remedy for the Tested Product & Its EMI Interference:
Remedy: N/A
EMI Interference:
Crystal : 14.318MHz(X2)/ 25MHz(X5)/ 32.768KHz(X1)/ 24.5MHz(X3)/ 24.5MHz(X4)
Clock Generator : U5
(D) Supported Host Peripherals:
Component
Brand
Model No. / Spec.
HDD
Maxtor
7Y250M0/6Y200M0
CD-ROM
BTC
DRW1108IM, DVD-Dual
Memory x2
A-Data
430F3H4TR/DDR2/533, 512MB
Power
Delta
SADP-220DB, 220W
(E) Notices for Assembling Computers:
1. An I/O shielding should be contacted with I/O metallic parts of a mainboard.
2. Cables should appropriately be arranged and fixed in a case. Follow instructions:
Ø
Leave IDE cables not crossed upon CPU and SDRAM;
Ø
Leave power cables minimum in length, and not crossed upon a mainboard;
Ø
Leave CPU fan cables minimum in length, and not near CPU;
Ø
Leave cables on panels and other spare cables tied in a computer case.
3. Make sure an EMI shielding attached to a case has been properly installed.
4. Make sure a 5.25" drive and screws are fastened to the case (EMI shielding).
5. Make sure the case is in contact with EMI connection points.
6. Make sure there is no cleft in the case.
7. Make sure a PCI door is bound to a case.
8. Make sure cables of other devices (fans or some others) are fixed in a case.
Содержание XPC SD11G5
