43
English
Quick Power On Self Test
This item speeds up Power-On Self Test (POST) after you power on the
computer. If it is set to enabled, BIOS will shorten or skip some check
items during POST.
Ø
The choice: Enabled, or Disabled.
First/Second/Third Boot Device
The BIOS attempts to load the operating system from the devices in the
sequence selected in these items.
Ø
The Choice: LS120, Hard Disk, CDROM, ZIP100, USB-FDD,
USB-ZIP,USB-CDROM, LAN, Disabled or Floppy.
Boot Other Device
If BIOS can't load O.S. from First/Second/Third boot device you select
above, BIOS will search other devices and attempt to load O.S..
Ø
The choice: Enabled or Disabled.
Boot Up NumLock Status
Selects power on state for NumLock.
Ø
The choice: Off or On.
Gate A20 Option
This entry allows you to select how the Gate A20 is handled. The gate
A20 is a device used for above 1MByte of address memory. Initially, the
gate A20 was handled via a pin on the keyboard. Today, while a key-
board still provides this support, it is more common and much faster in
setting to fast for the system chipset to provide support for gate A20.
Ø
The choice: Normal or Fast.
Typematic Rate Setting
Keystrokes repeat at a rate determined by the keyboard controller. When
this controller enabled, the typematic rate and typematic delay can be
selected.
Ø
The choice: Enabled or Disabled.
Typematic Rate (Chars/Sec)
This item sets how many times the keystroke will be repeat in a second
when you hold the key down.
Ø
The choice: 6, 8, 10, 12, 15, 20, 24, or 30.
Содержание XPC SD11G5
