- 81 -
If you set this field to "manual" , choose specific resources by going
into each of the sub-menu that follows this field (a sub-menu is pro-
ceeded by a ">").
"
The choice: Auto(ESCD) or Manual.
IRQ Resources
When resources are controlled manually, assign each system interrupt
a type, depending on the type of device using the interrupt.
IRQ3/4/5/7/9/10/11/12/14/15 assigned
This item allows you to determine the IRQ assigned to the ISA bus and
is not available to any PCI slot. Legacy ISA for devices is compliant with
the original PC AT bus specification; PCI/ISA PnP for devices is compli-
ant with the Plug-and-Play standard whether designed for PCI or ISA
bus architecture.
"
The choice: PCI Device or Reserved.
PCI/VGA Palette Snoop
It determines whether the MPEG ISA/VESA VGA Cards can work with
PCI/VGA or not. If you have MPEG ISA/VESA VGA Cards and PCI/
VGA Card worked, Enable this field. Otherwise, please Disable it.
"
The choice: Enabled or Disabled.
Assign IRQ For VGA
This item allows the user to set VGA IRQ Routing table Enabled or
Disabled.
"
The choice: Enabled or Disabled.
Assign IRQ For USB
This item allows the user the option to assign an IRQ to on-board USB
controller.
Since the on-board controller is always enabled, if no IRQ is assigned
to it, there will be a question mark report on the sytem device under
Windows95/98.
"
The choice: Enabled or Disabled.
INT Pin 1/2/3/4 Assignment
This item defines each PCI slot IRQ assignment by manually, which
can avoid the IRQ share problem for some PCI card cannot share IRQ.
"
The choice: Auto, 3, 4, 5, 7, 9, 10, 11, 12, 14, or 15.
