- 58 -
Soft-Off by PWR-BTTN
Under ACPI you can create a software power down. In a software
power down, the system can be resumed by Wake UP Alarms. This
item lets you install a software power down that is controlled by the
power button on your system. If the item is set to Instant-Off, then the
power button causes a software power down. If the item is set to Delay
4 Sec., then you have to hold the power button down for 4 seconds to
cause a software power down.
Ø
The choice: Delay 4 Sec. or Instant-Off.
CPU THRM-Throttling
This item specifies the CPU speed (at percentage) to have it slowed
down under the predeterminedly overheated temperature.
Ø
The choice: 87.5%, 75.0%, 62.5%, 50.0%, 37.5%, 25.0%, or
12.5%.
Wake-Up by PCI card
This item leaves PCI cards wake up the system from the suspend mode.
Ø
The choice: Enabled or Disabled.
Power On by Ring
This item defines the system will resume by activating of modem ring.
Ø
The choice: Enabled or Disabled.
USB Wake-Up From S3
If you are using USB devices, and the ACPI Suspend Type is set to S3 or
S1&S3, enable this item to have USB devices wake up the system from
power saving mode.
Ø
The choice: Enabled or Disabled.
Resume by Alarm
When set to Enabled, the following two items become available and
you can set the date, hour, minute and second to turn on your system.
Ø
The choice: Enabled or Disabled.
Date(of Month) Alarm
This item selects the alarm Date (day of the month).
Ø
Key in a DEC number: Min=0, Max=31.
Time(hh : mm : ss) Alarm
This item selects the alarm Time.
[hh]
Ø
Key in a DEC number: Min=0, Max=23.
[mm/ss]
Ø
Key in a DEC number: Min=0, Max=59.
