- 30 -
Extended USB Header (USB3)
The header is used to connect the cable attached to a USB connector which is
mounted on front panel or back panel. But the USB cable is optional at the time
of purchase.
Pin Assignments:
1=VREG_FP_USBPWR0 2=VREG_FP_USBPWR0
3=USB_FP_P0- 4=USB_FP_P1-
5=US 6=US
7=GND 8=GND
9=KEY 10=NC
Front Panel Microphone and Line-Out Header (AUDIO1)
This header allows users to install an auxiliary Front-Oriented Microphone and
Line-Out port for easier access. Either the Line-Out port connector on back-
panel or AUDIO1 header is available at the same time. If you would like to use
this header on front-panel, please remove all jumpers from this header and
install your special extra microphone and line-out cable instead. Two mini jump-
ers must be setted on pins 5-6 and pins 9-10, when this header is not used.
Pin Assignments:
1=AUD_MIC
2=AUD_GND
3=AUD_MIC_BIAS
4=AUD_VCC
5=AUD_FPOUT_R
6=AUD_RET_R
7=HP_ON/NC
8=KEY
9=AUD_FPOUT_L
10=AUD_RET_L
C5
C6
1
USB3
5
2
4
6
10
1
3
7
9
8
1
USB3
1
AUDIO1
1
AUDIO1
5
2
4
6
10
1
3
7
9
8
