- 34 -
IR Header (IR1)
If you have an Infrared device, this mainboard can implement IR transfer
function. This mainboard supports Normal or IrDA transfer mode. To enable
this function, attach a 6-pin infrared device cable to the IR (IR1) header, and
refer to the diagram below for the IR pin assignments.
Pin Assignments:
1=NC
2=KEY
3=+5V
4=GND
5=IRTX
6=IRRX
Note: Before connect your IR device to the IR (IR1) header, please note
that every pin is properly allocated. If not, your IR device may be
damaged.
E4
E4
1
IR1
1
3
5
2
4
6
IR1
1
