background image

11. 

BRIX PUMP LIMITED WARRANTY 

SHURflo warrants new BRIX pumps to be free from material and workmanship defects (under normal 
use and service) for a period of two years from the date of manufacture.  An additional one-month (30 
days) may be added to allow for storage and transit delays.  In any event, the total limited warranty time 
period will not exceed 25 months from date of manufacture. 

The limited warranty will not apply to any SHURflo pump that is improperly installed, misapplied, or 
incompatible with components not manufactured by SHURflo.  SHURflo will not warrant any pump, which 
is modified or damaged outside the SHURflo factory. 

All BRIX pumps 

MUST

 be flushed and sanitized when removed from service.  Pumps which are returned 

to SHURflo, that have not been flushed and/or did not receive periodic sanitization, will not be considered 
for testing, rework,  or warranty replacement and will be dispositioned as a "scrapped pump".  Returns 
may be shipped with the postage prepaid to either of our service centers (SHURflo East; Elkhart, IN or 
West Coast facility; Cypress, CA).  Package all returns carefully.  SHURflo will not be responsible for 
freight damage incurred during shipping to a service center. 

Upon receiving a pump, it will be tested per SHURflo's test criteria.  SHURflo's obligation under this 
warranty policy is limited to the repair or replacement (whichever it deems advisable) of the unit.  Pumps 
found not defective (under the terms of this limited warranty) are subject to charges to be paid by the 
returnee for the sanitization and packaging of "tested good" units. 

No credit or labor allowances will be given to the returnee for BRIX pumps returned as defective.  
Warranty replacements will be shipped on a freight allowed basis.  SHURflo reserves the right to choose 
the method of transportation.    

This limited warranty is in lieu of all other warranties, expressed or implied, and no other person is 
authorized to give any other warranty or assume obligation or liability on SHURflo's behalf.  SHURflo shall 
not be liable for any labor, damage or other expense, nor shall SHURflo be liable for any indirect, 
incidental or consequential damages of any kind incurred by the reason of the use or sale of any defective 
product or part. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание Brix 94-260-01















Отзывы: