9/20/17, 8*58 AM
Shure Publications | User Guides | ULX-D Dual and Quad Z16-20
Page 63 of 96
http://pubs.shure.com/guide/ULXD-DQ/en-US
For consistency, convenience, and easy
troubleshooting, use the same device ID for both
WWB6 (Shure Control) and for the Dante network.
The Dante network requires unique Dante device IDs
to prevent a loss of audio signal routing. Any
duplicate IDs on the network will be tagged with a
number such as -1, -2, -3, etc.... and must be
changed to a unique value.
WWB6 (Shure Control) does not require unique
device IDs and duplicates do not affect the Dante
network; however, a best practice is to use unique
device IDs.
Setting the Shure Control Device ID
1. Launch WWB6.
2. Open the Inventory View.
3. Click on the Device ID to enable editing.
Tip: Click on the device icon next to the channel name to identify
the receiver using the Flash function.
Optionally, the Shure Control Device ID can be entered
from the receiver front panel:
1. From the receiver menu: DEVICE
UTILITIES >
NETWORK > SHURE
CONTROL > Dev.
ID
2. Use the control wheel to edit the ID.
3. Press ENTER to save.
Creating a Dante Device ID
There are two ways to create a Dante ID:
1. Enter the ID using the receiver menu.
2. Enter the ID using a keyboard from the Dante
controller.
If entering IDs from the receiver menu, additional ID
modes are available for quickly adding sequential
numbering to multiple receivers or adding a prefixes for
