9/20/17, 8*58 AM
Shure Publications | User Guides | ULX-D Dual and Quad Z16-20
Page 51 of 96
http://pubs.shure.com/guide/ULXD-DQ/en-US
ENCRYPTION OFF
2. Press ENTER.
3. IR Sync the transmitter and receiver to clear the
encryption key.
Note: If multiple transmitters are encrypted to a single receiver,
each transmitter must be IR synced to clear the encryption key.
RF Cascade Ports
The receiver has 2 RF cascade ports on the rear panel to
share the signal from the antennas with 1 additional
receiver.
Use a shielded coaxial cable to connect the RF cascade
ports from the first receiver to the antenna inputs of the
second receiver.
Important! The frequency band must be the same for both
receivers.
Antenna Bias
Antenna ports A and B provide a DC bias to power active
antennas. Set the DC power to off when using passive
(non-powered) antennas.
To turn bias off: DEVICE
UTILITIES > ADVANCED
RF >
ANTENNA
BIAS > OFF
Networking ULX-D Receivers
ULX-D Dual and Quad receivers feature a Dante dual-port
network interface. Dante technology provides an
integrated solution to distribute digital audio, manage
control signals, and carry Shure Control (WWB and
AMX/Crestron) signals. Dante uses standard IP over
