background image

Shure Incorporated

48/86

Listen­

ing 

Chan­

nels 

(Down

link)

1 fixed Floor channel on speaker and headphones

8 assignable interpretation channels on headphone

Floor and Interpretation

The Floor Mix

Whenever a microphone is turned on, the audio is routed to the floor mix by default. The floor mix combines all active speakers 

and sends that signal to the other participant units for listening.

Listen to the floor mix on the unit loudspeaker or the headphone channel.

Loudspeakers: 

The floor mix is 

always

 the source for the loudspeakers

Headphones: 

The floor mix is also available on a headphone channel (Ch. 0)

Monitoring Active Microphones

Use the MXCW system web application to monitor and adjust the microphone slots for audio contributing to the floor mix. Go to 

Audio

 > 

Active microphones

.

Analog Connections

Easily connect additional equipment using the XLR analog connectors on the MXCW access point. Common applications in­

clude adding a Q&A or presenter microphone, sending audio out to a broadcast feed, or connecting to a teleconferencing sys­

tem.

Содержание Microflex MXCW























































































Отзывы: