background image

Shure Incorporated

22/86

LED Segment

LED State

Description

Battery hot

Green + Amber (alternate flashing)

In recovery

2

Green

>25% battery charge

3

Green

>50% battery charge

4

Green

>75% battery charge

Battery warm. See web application for 

details.

5

Green

<95% battery charge

Average Charging Times

Time Charging

Operating Runtime

Capacity

30 minutes

1 hour

10%

1.5 hours

5 hours

50%

4 hours

>11 hours

100%

*based on battery with 100% health

Charging Batteries with USB

Use the USB port on the conference unit to charge the battery during operation. This can be especially useful for long meetings 

or when backup batteries are not available. The battery status appears as a lightning bolt on the touchscreen when plugged in­

to USB.

When a battery is being charged while the unit is turned off, the charging status shows on the touchscreen. If the battery is fully 

charged, the conference unit powers off after 10 minutes.

Average Charging Times Using USB

MXCW640 Power Status

Time Charging

Capacity

On

8 hours

100%

Off

6 hours : 30 minutes

100%

USB Cable Requirements

Use a micro USB cable that can supply at least 2 amps of power to the conference unit.

If an insufficient power supply is plugged in while the conference unit is powered on, the battery status alternates between the 

status and a warning symbol. If the unit is powered off, the touchscreen shows it is not charging due to an insufficient power 

supply. The conference unit powers off again after 10 minutes.

Содержание Microflex MXCW























































































Отзывы: