![background image](http://html1.mh-extra.com/html/shure/dfr22/dfr22_software-manual_1261243055.webp)
©
2003 Shure Incorporated
DFR22 Software Guide
55
Crossover/Splitter/Subwoofer
Crossover/Splitter/Subwoofer
The crossover divides the frequency spectrum of the input signal into multiple bands, then outputs each band to a separate
channel. The splitter distributes the input signal across two outputs without any further processing. The subwoofer is a sin-
gle low pass filter. Because it is fully configurable, it can also be used as a bandpass or high pass filter.
Function
Use the crossover to divide the frequency range of the input signal with two filters, then distribute each frequency
band to a separate output for different types of speakers. Use the splitter when you need to simply distribute the
same signal to both outputs. Use the subwoofer to isolate a single frequency band before sending the signal to an
output. The crossover, splitter and subwoofer are for output processing only, and cannot be placed on input chan-
nel strips. See the Adding Processors:
The Crossover, Splitter, and Subwoofer section on page 23
for more infor-
mation on placing these processors in the signal flow diagram
Block Name
Description
XOVER 2
2-way Crossover
SPLIT 2
2-way Splitter
SUB
Subwoofer
1
2
3
4
5
6
7
FIGURE 7-5: XOVER2 Window
Содержание DFR22
Страница 1: ......