Shure Advance MXA310, Руководство пользователя

Страница: 10 / 55

Shure Incorporated
10/55
Connect the microphone output to port 1 on the MXWANI with a network cable. Port 1 provides the necessary Power over
Ethernet (PoE).
②
Computer to Shure MWXANI
Connect a computer to the ANI on port 2 or 3 with a network cable to provide control of the array microphone and other net-
worked components.
③
Shure ANI analog outputs to audio processor
Step 1: Route signals with Dante Controller software
Route the channels from the microphone (Dante transmitter) to the MXWANI channels (Dante receiver). This establishes the
discrete channels to deliver through the analog outputs.
Step 2: Connect the MXWANI outputs to the processing device inputs
Block connector outputs on the MXWANI send balanced audio signals to the inputs on the processing device, which provides
digital signal processing (such as acoustic echo cancellation).
④
Connection to far end
Connect the audio processor to a VOIP server or telephone line to send and receive audio between the near end and far
end.
⑤
Audio from far end to amplifier
Route the far-end audio through the audio processor output to an amplifier.
⑥
Amplified audio signal to loudspeakers
Connect the loudspeakers to the amplifier to hear the audio from the far end.