Showven BT04, Руководство пользователя

Страница: 5 / 12

2. Error information:
3. Setting Menu:
Press “MENU” to enter the Setting interface, press the “MENU” button to enter different
options until you return to the main interface
4. Advanced Menu:
Press “MENU” 3 seconds to enter the advanced setup interface, press MENU key to enter
different options, wait 3 seconds to return to the main interface
Error information Explanation
E0 System IC Systematic error
E2 Temp. Sensor Temperature sensor was damaged
E3 P Temp. Over
Chassis temperature is too high to shut
down
E4 Time Remain
Insufficient granules or remaining time,
please swiping time card
E5 K Temp. Over
Inner core temperature is too high to shut
down
E6 Heat Fail Heating failed
Options Range Explanation
Set DMX Address 1-512
Set the DMX address, machine become a
wireless host and can
send out DMX signal when its address is
“1++”
Wireless Control ON/OFF
Wireless function switch, you can match
code when shows “ON”
Manual Fountain ON/OFF
Manual fountain switch , for testing
purposes only
Options Range Explanation
Set Temperature 500-610 Setup inner Core temperature
Auto Heat ON/OFF
Auto preheat function switch after turn on
machine
Density 70-100 Adjust the sparks density
Mode Selection
Factory Mode
User Mode
Factory Mode is factory debugging mode,
User Mode is using mode
Default Parameter
Press “ENTER” to restore all parameters to
the factory settings