INSTALLATION
This chapter provides all required information and steps necessary for installing a Kabuki 30 system.
Note that a certain technical knowledge and experience are required to understand this guide and install this produc
BE SURE TO CHECK THE “HOW TO …” CHAPTER FOR CORRECT INSTALLATION OF THE SYSTEM.
NECESSARY STEPS
1. Check that correct channel nut is mounted (M10 or 3/8” ).
2. Fasten 100kg Hook Clamp as provided and fix to truss.
3. Install all units at appropriate locations.
4. Connect all cables.
5. Perform safety instruction check-up.
6. Arm Kabuki 30.
7. Insert fabric or 6mm sashline in the gripping zone.
8. Repeat operation on other units.
9. Trigering the cotrol unit will release the gripping system.
10. Check that power trigger does not exceed
30 seconds.
11. Go back to step 6 to reload the system.
12. Arm every unit before dismantling.
NECESSARY TOOLS
The following tools are needed to install the Kabuki 30
SHOWTEX INSTALLATION MANUAL
7
KABUKI 30
Allen Key n°4
Allen Key n°8
