SHOWTEC TriFlood, Руководство по эксплуатации продукта

Страница: 7 / 15

5
Backside
Fig. 2 Fig. 3
3) Menu-button 8) DMX IN 13) IEC powercon Fuse F6,3A / 250V
4) UP-button 9) DMX OUT
5) DOWN-button 10) Audio sensibility
6) DOWN-button 11) Foot Controller
7) DOWN-button 12) Microphone
Installation
Installing the Lamp
The Showtec TriFlood uses 3x R7-S lamps (ordercode 82281), as manufactured by all popular
manufacturers. Use only the appropriate lamp for your unit.
Note that, product versions that use other lamps, may be offered in the future. Check your product
specification label for information.
Always disconnect from electric mains power supply before changing lamps.
The lamp has to be replaced when it is damaged or deformed due to the heat.
Do not install lamps with a higher wattage ! Lamps with a higher wattage generate temperatures the
device was not designed for.
Damages caused by non-observance are not subject to warranty.
Procedure:
1. Loosen the 4 screws on the housing.
2. Gently remove the metal cover. Do not touch the lamp bulb glass. Oil on hands shortens the lamp
life. (If you touch the bulb glass, wipe off the glass with a clean, lint-free towel and rubbing alcohol.)
3. Insert the lamp into the lamp socket. You have to install 3 Lamps.
4. Put the lamp cover back and fasten the screws snugly.
1 2 3 Fig. 4