13
Changing the Lamp
1.
Disconnect mains power supply. Loosen the 6 screws on the cover.
Remove the cover and gently pull out the lamp socket.
2.
With one hand holding the lamp socket, pull the lamp out of the lamp socket with the other.
3.
Follow directions for installing a new lamp, page 7.
Replacing a Fuse
Power surges, short-circuit or inappropriate electrical power supply may cause a fuse to burn out. If the
fuse burns out, the product will not function whatsoever. If this happens,
follow the directions below to do
so.
1.
Unplug the unit from electric power source.
2.
Insert a screwdriver into the slot in the fuse cover.
Insert a flat-head screwdriver into a slot in the fuse
cover. Gently pry up the fuse cover. The fuse will come out.
3.
Remove the used fuse. If brown or unclear, it is burned out.
4.
Insert the replacement fuse into the holder where the old fuse was. Reinsert the fuse cover. Be sure to
use a fuse of the same type and specification. See the product specification label for details.
Troubleshooting
No Light
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
If the light effect does not operate properly, refer servicing to a technician.
Response: Suspect three potential problem areas: the power supply, the lamp, the fuse.
1.
Power supply. Check that the unit is plugged into an appropriate power supply.
2.
The lamp. Replace the old lamp with a new one with the same specifications. See page 7 for
replacing lamps.
3.
The fuse. Replace the fuse. See page 13 for replacing the fuse.
Содержание Starzone Gobo Quake DMX
Страница 1: ...Starzone Gobo Quake DMX ORDERCODE 31322...
Страница 17: ......