SHOWTEC Stage Blinder 4 Blaze, Руководство пользователя

Страница: 11 / 32

10
Ordercode: 30781
Stage Blinder 4 Blaze
Multiple Stage Blinders (DMX Control)
01)
Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Use a 3-pin XLR cable to connect the Stage Blinder and other devices.
05)
Link the units as shown in fig. 04. Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third and fourth units.
06) Supply electric power: Plug electric mains power cords into each unit's Pro power True 1 socket, then
plug the other end of the mains power cord into proper electric power supply sockets, starting with
the first unit. Do not supply power before the whole system is set up and connected properly.
Multiple Stage Blinders DMX Set Up
Fig. 04
Note: Link all cables before connecting electric power