SHOWTEC SM-16/2, Руководство пользователя

Страница: 8 / 21

6
5) LCD display window
Status window displays pertinent operational data
6) Midi/Add button
Activates MIDI external control and also used to confirm the record/save process
7) Bank Up button
Press the Up button to select from 30 banks.
8) Auto/Del button
Activates Music mode or to delete scenes or chases during programming
9) Tapsync/Display button
Used to create a standard beat or to change the value mode between % and 0-255.
10) Speed fader
This will adjust the hold time of a scene or a step within a chase (range of 0.1 second to 10 minutes).
11) Fade Time fader
Used to adjust the fade time. Fade time is the amount of time it takes for a scanner (or scanners) to
Move from one position to another, for the dimmer to fade in or fade out.
12) Page B Indicator
LED represents Ch 17~30 range selected
13) Fixture select buttons
To select fixtures for setting, programming or recording.
14) Fixture indicator
LED's Indicates the fixtures currently selected
15) Page select button
Used to select page between Page A (I-14) and Page B (17-30).
16) Page select button
Used to select page between Page A (I-14) and Page B (17-30).
17) Blackout indicator
LED light up if blackout is activated.
18) Bank Down button
Press the Down button to select from 30 banks.
19) Pan wheel
used to control the Pan of the scanner
20) Music/Bank Copy button
Activates Music mode or as the copy command during programming
21) Program button
22) Tilt wheel
used to control the Tilt of the scanner
Controller Backside
Fig. 2
23) 3-pin DMX output connector
24) 5-pin DMX output connector
25) DMX polarity switch May be used to change signal polarity
26) MIDI input port for external triggering of banks, scenes, chases, and blackout using a MIDI device
27) DC Input jack Main power feed
28) ON/OFF power switch Turns the controller on and off