SHOWTEC SM-16/2, Руководство пользователя

Страница: 11 / 21

9
PHYSICAL FADER ASSIGNMENT (OPTIONAL SETUP)
Use this feature to combine or unify fixture control attributes for different fixtures. For example; if you
were controlling 4 moving mirrors and 4 moving yokes, the color, gobo and dimmer channels may not
line up ideally on the physical faders. Use this function to re-assign the dimmer, color and gobo
channels to faders 1, 2 and 3. From now on you will be able to control the same attributes on all
fixtures using the same fader location.
1) Press and hold PROGRAM & TAPSYNC buttons together (1) to access the channel assignment
mode.
2) Press a FIXTURE button that represents the fixture whose faders you would like to re-assign.
3) Move the SPEED fader until you arrive at controller channel (number).
4) Move the FADE TIME fader to select the DMX channel.
5) Press the MIDI/ADD button to confirm setting.
6) Repeat steps 3 ~ 5 as often as necessary.
If you wish to copy a scanner’s physical assignments to another scanner, continue by following
steps 7-13. If you do not wish to do this, press and hold
PROGRAM & TAPSYNC buttons (2) times to exit
mode.
Example: Copying Scanner 1 into Scanner 2
1) Press and hold PROGRAM & TAPSYNC buttons together (1) time to access the channel assignment
mode.
2) Press and hold FIXTURE button # 1.
3) While holding button # 1 press FIXTURE button # 2.
4) While holding FIXTURE buttons # 1 and # 2, press and hold MIDI/ADD button.
5) Release FIXTURE button # 1 first before releasing FIXTURE button # 2.
6) Release MIDI/ADD button.
7) All FIXTURE LED indicators will flash to confirm successful copy.
8) Press and hold PROGRAM & TAPSYNC buttons (2) times to exit mode.
THE JOYSTICK IS PROGRAMMED TO CONTROL CHANNELS P1/P2 (X-AXIS) AND T1/T2 (Y-AXIS)
BY DEFAULT. FOLLOW THE INSTRUCTIONS FOR “PHYSICAL FADER ASSIGNMENT” AND “REVERSE
CHANNEL OUTPUT” TO RECONFIGURE THE JOYSTICK.