SHOWTEC SM-16/2, Руководство пользователя

Страница: 16 / 21

14
Playback (Scenes)
RUNNING IN MANUAL MODE
When power is first turned ON, the controller will be in manual scene mode.
1) Make sure the display reads “ MANUAL ”.
2) Select the program BANK that stores the scene you want to run manually by using the BANK UP/DOWN .
3) Press the SCENE button to run.
Note:
If you are in programming mode you can also press and hold the PROGRAM button until the
display shows “ MANUAL ” again.
RUNNING IN SOUND-MODE
1) Press the MUSIC/BANK-COPY button until the display reads “ MUSIC “.
2) Change BANK programs by using BANK UP/DOWN buttons if necessary.
3) Press the MUSIC/BANK-COPY to exit.
Note:
In the sound mode, programs will be triggered by sound using the unit’s built in microphone. All
scenes in a bank will chase.
RUNNING IN AUTO-MODE
1) Press and hold the AUTO DEL button until the display reads “ AUTO “.
2) Change BANK programs by using BANK UP/DOWN buttons if necessary.
3) You can adjust the time between steps by moving the SPEED fader and the duration of the step by
moving the FADE TIME fader.
4) You can change Banks while in operation by using the BANK UP/DOWN buttons.
Notes:
In the auto mode, programs will be triggered by controllers fade and speed time as set on the
faders. All scenes in a bank will chase.
Caution! The fade setting should never be slower than the speed setting or the scene will never
complete execution.
To revert the programmed speed and fade time, tap the program button.
BLACKOUT
The Blackout button brings all lighting output to 0 or off (also called the home position of the unit).