SHOWTEC Scanmaster 1, Руководство пользователя

Страница: 9 / 34

1. Overview 1. Overview
2. Scene Buttons
3. Segment Display
4. Bank Buttons(Up/Down)
5. Chase Buttons(1-6)
6. Program Button
7. MIDI/Rec Button
8. Auto/Del Button
9. Music/Bank Copy
10. Blackout Button
11. Tap Sync/Display
12. Fade Time Slider
13. Speed Slider
14. Page Select Button
15. Faders
1. MIDI IN
3. DMX Out
4. DC Input
2. DMX Polarity Select
There are a maximum of 240 programmable scenes.
Receives MIDI data.
Used to select DMX polarity.
or DMX pack.
DC 9-12V, 300mA min.
This connector sends your DMX value to the DMX fixture
Shows the current activity or programming state.
Press the Up/Down buttons to select a bank from 30 banks.
maximum of 240 scenes
Used to activate Program mode.
Used to control MIDI operation or to record programs.
Used to activate Auto mode or to delete scenes and chases.
chase programs.
Used to disable channel output.
display between % and 255.
another, for the dimmer to fade in or fade out.
Used to adjust the speed at which the scenes will chase.
and Page B (9-16).
These faders are used to control the intensity of channel 1-8
or channel 9-16 depending upon the selected page.
Used to select faders for the fixture between Page A(1-8)
of time it takes for a fixture to move from one position to
Used to adjust the Fade Time. Fade Time is the amount
Used to create a standard beat or to change the values
Used to activate Music mode or to create scenes and
Used to select your programmed chase consisting a
Press the scene buttons to load or stored your scenes.
1.2 Rear View 1.1 Front View
5 6
DC INPUT DMX OUT MIDI IN
1 2
3
9~12V, 300mA min.
DMX POLARITY
SELECT
1=Ground
2=Data +
3=Data
-
1=Ground
2=Data -
3=Data +
1 2 3 4