SHOWTEC Revolution 250, Руководство пользователя

Страница: 11 / 21

9
Multiple Revolutions
1. Fasten the effect light onto firm trussing (Use a 30-kg rated or stronger C-clamp fastened onto the
Revolution ). Leave at least 1 meter on all sides for air circulation.
2. Use a 3-p XLR cable to connect the Revolution s and other devices.
The pins:
1. Earth
2. Signal -
3.
3. Link the units as shown in (figure 4), Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
4. Supply electric power: Plug electric mains power cords into each unit's IEC socket, then plug the other
end of the mains power cord into proper electric power supply sockets, starting with the first unit. Do not
supply power before the whole system is set up and connected properly.
Multiple Revolutions Set Up
DMX-Set up
Master/Slave Set up
Fig. 4
Note : Link all cables before connecting electric power