SHOWTEC Revolution 250, Руководство пользователя

Страница: 14 / 21

12
- The controller is switched off or defective, the cable or connector is detective, or the signal wires are
swapped in the input connector.
Note: It’s necessary to insert a XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link. (only with lines more than 100 m.)
Remotely controllable functions
Colour-wheel
The Revolution contains a colour-wheel with 12 colour positions. 11 dichroic colours and one white. The
colour-wheel can be positioned between two adjacent colours in any position. It is also possible to rotate the
colour-wheel continuously at different speeds ( “Rainbow effect” in both directions).
Rotating gobo-wheel
This rotating gobo-wheel has 3 metal gobos, 3 glass gobos and open. The gobos have an outside diameter
of 27 mm and an image diameter of 23 mm.
Shutter/Dimmer/Strobe
The dimming (0-100%) is provided by a simple mechanical shutter unit. This unit may also be used for
strobe effect (1-10 flashes per second).
Functions control panel
The control panel is situated on the front of the base and offers several features. You can simply set the
DMX address, master/slave mode, make a reset and also use many functions for setting purposes.
The main menu of the control panel is accessed by pressing the
button [MODE] - press this one until the
display shows (with actually stored address).
Addressing
Fig. 6
Display with Menu and Select functions.