11
OFF, this means the fixture is deselected.
10.
Press the Enter pedal
(13)
to save the chase step. The LED will flash 3 times.
11.
If you want to insert more chase steps, repeat step 4 - step 11.
12.
Push Record button to exit the "Insert" mode. The record LED is ON.
13.
If you have completed your chase steps and you want to exit program mode, press and hold the
Record button
(2)
for 3 seconds, the record LED will dim.
2.3 Modify A Chase Step
1.
To enter the Program Mode, press and hold the Record button
(2)
for 3 seconds, the record LED will
light up red.
2.
To select the CHASE mode, press the Mode/Channel Patch pedal
(10)
and select the CHASE mode.
The LED display above the Mode/Channel Patch pedal
(10)
will show “CHASE”.
3.
Press the MUSIC/AUTO/BLACKOUT pedal
(14)
to select the chase, you want to program.
4.
The display shows 01 01/00 meaning, Chase 1 Step 01 from 00 (in this example no steps where
programmed yet)
5.
Use the UP and DOWN pedals (
11
+
12
) to select the chase step, you want to modify.
6.
Press a Fixture button
(1)
to select the fixture, you want to modify the DMX value for. When the Blue
fixture LED is ON, the fixture can be set.
7.
If you want to change the DMX values, use the rotary controls RED, GREEN, BLUE and MASTER.
8.
Press the Enter pedal
(13)
to save the chase step. The LED will flash 3 times.
9.
If you want to insert more chase steps, repeat step 5 - step 8.
10.
To exit program mode, press and hold the Record button
(2)
for 3 seconds, the record LED will dim.
2.4 Delete A Chase Step
1.
To enter the Program Mode, press and hold the Record button
(2)
for 3 seconds, the record LED will
light up red.
2.
To select the CHASE mode, press the Mode/Channel Patch pedal
(10)
and select the CHASE mode.
The LED display above the Mode/Channel Patch pedal
(10)
will show “CHASE”.
3.
Press the MUSIC/AUTO/BLACKOUT pedal
(14)
to select the chase, you want to program.
4.
Use the UP and DOWN pedals (
11
+
12
) to select the chase step, you want to program.
5.
To enter Delete Mode, press and hold the Patch button
(3)
for 3 seconds and the PATCH LED will start
flashing red.
6.
To delete a chase step, press the Enter pedal
(13)
. All LEDs will flash 3 times.
7.
Repeat step 4 - step 6 to delete other chase steps.
8.
To exit Delete Mode, press and hold the Patch button
(3)
for 3 seconds.
9.
If you have completed your chase steps and you want to exit program mode, press and hold the
Record button
(2)
for 3 seconds, the record LED will dim.
2.5
Playback Chase
1.
Press the Mode/Channel Patch pedal
(10)
to select the desired CHASE mode. The LED display above
the Mode/Channel Patch pedal
(10)
will show “CHASE“.
2.
Select a chase to run
Press the UP and DOWN pedals (
11
+
12
) to select the chase to run.
3.
Press the FUNCTION pedal
(13)
to select the speed time setting mode. The LED display above the UP
and DOWN pedals (
11
+
12
) will show “SPEED 01”.
4.
Press the UP and DOWN pedals (
11
+
12
) to set the desired speed time.
5.
Press the FUNCTION pedal
(13)
to select the fade time setting mode. The LED display above the UP
and DOWN pedals (
11
+
12
) will show “FADE 01”.
6.
Press the UP and DOWN pedals (
11
+
12
) to set the fade time.
Содержание LED Foot 4
Страница 1: ...LED Foot 4 V2 ORDERCODE 50719...
Страница 18: ......
