9
1. Scenes
1.1 Program Scene
1.
To enter the Program Mode, press and hold Record button
(2)
for 3 seconds, the record LED will light
up red.
2.
To select the SCENE mode, press the Mode/Channel Patch pedal
(10)
. The LED display above the
Mode/Channel Patch pedal
(10)
will show “SCENE”.
3.
Use the UP and DOWN pedals (
11
+
12
) to select the scene you want to program.
4.
Select a Fixture
.
Press a Fixture button
(1)
to select the fixture you want to set the DMX value for. When the fixture LED is
ON, the DMX values can be changed.
5.
If you want to change the DMX values, use the rotary controls RED, GREEN, BLUE and MASTER.
6.
To deselect a Fixture, press the specific Fixture button
(1)
to dim that fixture LED. When the LED is OFF,
this means the fixture is deselected.
7.
Repeat step 4 - step 6 to set the DMX values for other fixtures.
8.
To save the scene, press the Enter pedal
(13)
. All LEDs will flash 3 times
9.
To program other scenes, repeat step 3 - step 8 until you have completed your desired scenes.
10.
If you want to exit program mode, press and hold the Record button
(2)
for 3 seconds, the record LED
will dim.
1.2 Delete Scene
1.
Enter Program Mode, press and hold the Record button
(2)
for 3 seconds, the record LED will light up
red.
2.
Select the SCENE mode by pressing the Mode/Channel Patch pedal
(10)
. The LED display above the
Mode/Channel Patch pedal
(10)
will show “SCENE”
3.
Use the UP and DOWN pedals (
11
+
12
) to select the scene you want to delete.
4.
To enter Delete Mode, press and hold the Patch button
(3)
for 3 seconds and the PATCH LED will start
flashing red.
5.
Press the Enter pedal
(13)
to confirm. All LEDs will flash 3 times and the scene is deleted.
6.
To delete other scenes repeat step 2 - step 5.
7.
If you have deleted your scenes and you want to exit program mode, press and hold the Patch
button
(3)
for 3 seconds to leave the Delete Mode.
8.
To exit program mode, press and hold the Record button
(2)
for 3 seconds, the record LED will dim.
1.3 Delete All Scenes
1.
Enter Program Mode, press and hold the Record button
(2)
for 3 seconds, the record LED will light up
red.
2.
Select the SCENE mode by pressing the Mode/Channel Patch pedal
(10)
. The LED display above the
Mode/Channel Patch pedal
(10)
will show “SCENE”
3.
To enter Delete Mode, press and hold the Patch button
(3)
for 3 seconds and the PATCH LED will start
flashing red.
4.
Push Record button again, LED will Flash this will show you are in "Insert" mode.
5.
Press the Enter pedal
(13)
to confirm. All LEDs will flash 3 times and all scenes are deleted.
6.
Push Record button to exit the "Insert" mode. The record LED is ON.
7.
If you have deleted your scenes and you want to exit program mode, press and hold the Patch
button
(3)
for 3 seconds to leave the Delete Mode.
8.
To exit program mode, press and hold the Record button
(2)
for 3 seconds, the record LED will dim.
1.4
Playback Scene
1.
To select the SCENE mode, press the Mode pedal
(10)
to select the SCENE mode. The LED display
above the Mode/Channel Patch pedal
(10)
will show “SCENE”.
2.
Press the FUNCTION pedal
(13)
to select the speed time setting mode. The LED display above the UP
and DOWN pedals (
11
+
12
) will show “SPEED 01”.
You can choose between SPEED 00 (slow)- SPEED 16 (fast). Speed 0 = hold scene
3.
Press the UP and DOWN pedals (
11
+
12
) to set the desired speed time.
4.
Press the FUNCTION pedal
(13)
to select the fade time setting mode. The LED display above the UP
and DOWN pedals (
11
+
12
) will show “FADE 01”.
You can choose between FADE 01-FADE 16. FADE 01 = NO FADE
5.
Press the UP and DOWN pedals (
11
+
12
) to set the fade time.
Содержание LED Foot 4
Страница 1: ...LED Foot 4 V2 ORDERCODE 50719...
Страница 18: ......
