8
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Remove all packing materials from the LED-Foot 4. Check that all foam and plastic padding is removed.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
1. Factory Reset
1.
When the Blackout LED is off, press and hold the Record button
(2)
+ Blackout Button
(4)
for 5
seconds until all LEDs flash.
The controller will reset to its default factory setting.
2. Channel Assignment
1.
To enter the channel assignment mode press the Patch button
(3)
for 3 seconds. The Patch LED will
light up red, which indicates the controller is in channel assignment mode.
2.
To select the fixture you want to patch, press one or multiple Fixture buttons
(1)
. When the Fixture LED
lights up blue, the fixture can be patched.
-
Each fixture occupies 7 DMX Channels
-
DMX channel 1-128 can be assigned
3.
To select a DMX channel, press the Mode/Channel Patch pedal
(10)
and select the DMX channel
you want to patch.
4.
When you want to select a fixture function, press the UP and DOWN pedals (
11
+
12
). You can now
select the fixture function, you want to use to control the DMX channel.
5.
The fixture functions you can choose are: RED, GREEN, BLUE, MASTER and NO PATCH.
The NO PATCH Channel means this DMX channel is not controlled by any of the 4 rotor controls.
6.
The "F" letter on the display indicates the Fixture number, so F1RED means Fixture 1, RED Rotary.
There are 7 channels available for every fixture.
However there are only 4 rotary controls.
But you can use all 7 channels, example:
Fixture 1 CH1 Red, Fixture 2 CH2 Red, Fixture 3 CH3 Red, CH4 Green, CH5 Blue, CH6 Master, CH7 NO
PATCH.
7.
To save the patch assignment, press the Enter pedal
(13)
to save the patch assignment. All LEDs will
flash 3 times.
8.
When you want to patch more DMX channels, repeat step 2 - 5 to patch other channels.
9.
To exit the channel assignment mode, press and hold the Patch button
(3)
for 3 seconds.
The red Patch LED will dim.
Содержание LED Foot 4
Страница 1: ...LED Foot 4 V2 ORDERCODE 50719...
Страница 18: ......
