20
previous menu.
16)
Use the UP Button to scroll through the menu until the display shows “
Fd_m
”. (0-59). Use the UP/DOWN
buttons to change the value from 0-59. Press the ENTER button to store your setting and return to the
previous menu.
17)
Use the UP Button to scroll through the menu until the display shows “
Fd_S
”. (0-59). Use the UP/DOWN
buttons to change the value from 0-59. Press the ENTER button to store your setting and return to the
previous menu.
18)
Use the UP Button to scroll through the menu until the display shows “
Scrun
”. Use the UP/DOWN
buttons to choose between ON or OFF. Press the ENTER button to store your setting and return to the
previous menu.
19)
You have now made all your TEST settings, press and hold down the ENTER button for six seconds to
return to the main menu.
Fixt = Fixture
Fm_H = Step Time Hour
Shutt = Shutter
Fm_m = Step Time Minute
R = Red
Fm_s = Step Time Seconds
G = Green
Fd_H = Fade Time Hour
B = Blue
Fd_m = Fade Time Minute
Mac = Macro
Fd_s = Fade Time Seconds
Scrun = Scene Run
19. Scheduler
Note: If you want to use
Sched1
, be sure to turn Menu 17 “
PGRUN
“ to OFF.
The Scheduler menu gives you access you to the programming of “events”. You are able to run the
playback of programs previously set with the LED City Painter, with the necessary times and modes. There
are 48 events and of each event you can control the start- and stop-time of a program, day by day or
on a weekly basis.
1)
Use the UP/DOWN buttons to scroll through the display, until it shows “
Sched1.
”.
2)
Press the ENTER button and the display will show “
event
” (1-36). Use the UP/DOWN buttons to change
the value from 1-36. Press the ENTER button to store your setting and return to the previous menu.
3)
Use the UP Button to scroll through the menu until the display shows “
Prog.
”. (0-5). Use the UP/DOWN
buttons to change the value from 0-5. Press the ENTER button to store your setting and return to the
previous menu.
4)
Use the UP Button to scroll through the menu until the display shows “
Day
”. Use the UP/DOWN
buttons to choose All, Mon, Tue, Wed, Thu, Fri, Sat, Sun. Press the ENTER button to store your setting and
return to the previous menu.
5)
Use the UP Button to scroll through the menu until the display shows “
Start
”. Press the ENTER button to
set the Hour (0-23) and Minutes (0-59). Use the UP/DOWN buttons to change the Hour. Once you have
set the hour, press ENTER to change the Minutes. When your finsihed press ENTER to store your setting
and return to the previous menu.
6)
Use the UP Button to scroll through the menu until the display shows “
End
”. Press the ENTER button to
set the Hour (0-23) and Minutes (0-59). Use the UP/DOWN buttons to change the Hour. Once you have
set the hour, press ENTER to change the Minutes. When your finsihed press ENTER to store your setting
and return to the previous menu.
7)
Use the UP Button to scroll through the menu until the display shows “
Enable
”. Use the UP/DOWN
buttons to choose between ON or OFF. Press the ENTER button to store your setting and return to the
previous menu. You have now made all your TEST settings, press and hold down the ENTER button for six
seconds to return to the main menu.
20. Time
