SHOWTEC LED City Painter 45, Руководство пользователя

Страница: 19 / 27

17
10. Setting Default parameters / Reset
This enables to set the default parameters
1) Use the UP/DOWN buttons to scroll through the display, until it shows “ Fact ”.
2) Press the ENTER button and “ OFF ” will begin to flash on the display.
3) Use the UP/DOWN buttons to switch between OFF and SET.
4) Press ENTER to store your setting and exit the Fact menu.
Menu item Default parameter
ADDR 001
BRIGHT 40%
DMXDLY UNL
11. Resetting default parameters
This enables you to reset the parameter values set, immediately before the FACT=SET operation. In other
words, if the
default parameters have been set by mistake, this operation allows you to revert to
the values set previously.
1) Use the UP/DOWN buttons to scroll through the display, until it shows “ Prev ”.
2) Press the ENTER button and “ OFF ” will begin to flash on the display.
3) Use the UP/DOWN buttons to switch between OFF and SET.
4) When you press ENTER when the display shows SET, you reset the values, hereby cancelling the
FACTORY DEFAULT operation.
5) Press ENTER to store your setting and exit the Prev menu.
12. Test functions
In test menu, it is possible to test a lot of different functions to make sure the fixture operates correctly.
1) Use the UP/DOWN buttons to scroll through the display, until it shows “ Test ”.
2) Press and hold down the ENTER button for six seconds.
3) The display will show “ Red ”. Press the ENTER button and the fixture will test the RED LEDs. Press and hold
down the ENTER button for six seconds to return to the previous menu.
4) Use the UP/DOWN buttons to select (RED, GREEN, BLUE, CTC, ALL, SHUTT, DIMMER).
5) Use the UP Button to scroll through the menu until the display shows “ Green ”. Press the ENTER button
and the fixture will test the GREEN LEDs. Press the ENTER button to return to the previous menu.
6) Use the UP Button to scroll through the menu until the display shows “ Blue ”. Press the ENTER button and
the fixture will test the BLUE LEDs. Press the ENTER button to return to the previous menu.
7) Use the UP Button to scroll through the menu until the display shows “ CTC ”. Press the ENTER button and
the fixture will test the CTC. Press the ENTER button to return to the previous menu.
8) Use the UP Button to scroll through the menu until the display shows “ ALL ”. Press the ENTER button and
the fixture will test the ALL functions. Press the ENTER button to return to the previous menu.
9) Use the UP Button to scroll through the menu until the display shows “ Shut ”. Press the ENTER button and
the fixture will test the Shutter. Press the ENTER button to return to the previous menu.
10) Use the UP Button to scroll through the menu until the display shows “ Dimmer ”. Press the ENTER button
and the fixture will test the Dimmer. Press the ENTER button to return to the previous menu.
11) You have now made all your TEST settings, press and hold down the ENTER button for six seconds to
return to the main menu.