SHOWTEC Hydrogen DMX MKII, Руководство пользователя

Страница: 9 / 24

Ordercode: 43151
Hydrogen DMX MKII
Backside
Fig. 02
03) DMX signal IN
04) DMX signal OUT
05) IEC Power OUT DC 100-240V
06) IEC Power IN DC 100-240V + Fuse T1AL/250V
07) Ground/earth connection
NOTE: Knowledge of DMX is required to fully utilize this unit.
Installation
Remove all packing materials from the Hydrogen DMX MKII. Check if all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
8