SHOWTEC Hydrogen DMX MKII, Руководство пользователя

Страница: 16 / 24

Ordercode: 43151
Hydrogen DMX MKII
3.DMX Mode
With this menu you can set the DMX address.
01)
Press the MODE button and then the Up and Down buttons, until the display shows .
02) Press the SETUP button to open this menu. You can choose 512 different DMX addresses.
03) Use the Up and Down buttons to select the required address from .
Once you have set the desired DMX address, you can also choose the desired DMX Mode.
04) Press SETUP button again until you see . It indicates that the fixture is equipped with four active
DMX channels.
4.Master/Slave Mode
With this menu you can set the Master or Slave.
01)
Press the MODE button and then the Up and Down buttons, until the display shows .
If the device has not been set to slave, it is automatically classified as a master device. All slave
devices will copy the actions of the master device.
If the device has been set to slave, it will react the same as its master device.
DMX Channels
4 channels
Channel 1 – LED brightness
0-255 From dark to brightest
Channel 2 – Water effect
0-127 Water effect active, from slow to fast
128-255 Water effect inactive
Channel 3 – Water effect color change
0-127 Water effect color change active, from slow to fast
128-255 Water effect color change inactive
Channel 4 – LED strobe
0-9 LED strobe inactive
10-255 LED strobe active, from slow to fast flash
15