SHOWTEC FX Shot MK II, Руководство пользователя

Страница: 4 / 20

3
Ordercode: 60906
FX Shot MKII
Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
●
Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
● Never remove warning or informative labels from the unit and, on regular basis, make sure that they
remain clearly visible and legible.
● Never place any material over the cannon tube.
● Never use anything to cover the ground contact.
● Never use the device during thunderstorms, unplug the device immediately.
● Never look directly into the cannon tube.
● Never leave any cables lying around.
● Never replace parts by yourself.
● Do not open the device and do not modify the device.
● Do not insert objects into air vents.
● Do not expose the device to any source of vibration.
● Do not insert objects into the cannon tube.
● Do not switch the device on and off in short intervals, as this would reduce the device’s life.
● Do not touch the FX Shot while working or if it is connected to the mains power. Even if the FX Shot is
not in operation, the electric cannons can still be filled and cause harm.
● Do not remove or disable the safety devices.
● Do not shake the device. Avoid brute force when installing or operating the device. The FX Shot
reacts very sensitive to movement.
● All required safety equipment must be in good condition and must be working properly.
● Use the device ONLY if there ARE NOT ANY people, animals or other objects in the direction of the
output within the output range. The shooting direction is the direction in which the output pipe on
the FX Shot is pointed.
● Only use the device indoors, avoid contact with water or other liquids.
● Only operate the fixture after having checked that the housing is firmly closed and all screws are
tightly fastened.
● Only use the FX Shot according to the instructions in this manual.
● Only operate the device after having familiarized with its functions.
● Avoid flames and do not put close to flammable liquids or gases.
● Always allow free air space of at least 50 cm around the unit for ventilation.
● Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord by the plug. Never pull out the plug by tugging the power cord.
● Always keep the workplace clean and provide adequate ambient lighting.
● Make sure that the device is not exposed to extreme heat, moisture or dust.
● Make sure that the available voltage is not higher than stated on the rear panel.
● Make sure that all the required safety devices are in good condition and function properly.
● Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
● If text and/or icons are missing, damaged or illegible on the FX Shot, they should be replaced.
● If the cannon tube is obviously damaged, it needs to be replaced, so that its functions are not
impaired.
● If the device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.