SHOWTEC Dynamic LED, Руководство пользователя

Страница: 10 / 21

8
Multiple Messengers ( Master/Slave control)
Fig. 3
Multiple LED Messenger ( DMX Control )
1. Plug the end of the electric mains power cord into a proper electric power supply socket.
2. Use a 3-p XLR cable to connect the Messengers.
3. Link the units as shown in (figure 4), Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
4. Supply electric power: Plug the end of the mains power cord into proper electric power supply sockets.
Do so for all units and the controller.
Multiple Messengers Pro Set Up
Max. 30 Messengers
Fig. 4
Note : Link all DMX cables and set dip switches before connecting electric power
6. Do not supply power before the whole system is set up and connected properly.
Design your show according to your DMX controller functions. See page 14 for more about DMX
programming.