SHOWTEC Cameleon Spot 18-3, Руководство по эксплуатации продукта

Страница: 9 / 22

7
Backside
Fig. 2
3 4 5 6 7 8
3) 3-pin DMX In 6) Eye for safety cable
4) 3-pin DMX Out 7) IEC Out (linkable max. 15 units)
5) LCD D Menu Buttons Earth connection 8) IEC In + Fuse 1A/250V
Installation
Remove all packing materials from the Compact Par 18 Tri MKII. Check that all foam and plastic padding
is removed. Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Damages caused by non-observance are not subject to warranty.