13
4.4
Delete a Chase
8.
Deselect all fixtures, scenes and chases.
9.
Press and hold down the the Record button (
15
) for 3 seconds to enter Record Mode.
10.
The red LED next to the button lights up.
11.
Select the proper Page by pressing the Page button (
14
). The orange LED next to the button lights up
12.
Press and hold the Tap Sync button (
16
). Now press the corresponding Chase button (
3
), that you
want to delete.
13.
All LEDs will flash 3 times, indicating your operation has been successful.
14.
Exit Record Mode by pressing the Record button (
15
).
4.5
Add an extra Step to an existing Chase
1.
Press and hold down the the Record button (
15
) for 3 seconds to enter Record Mode.
2.
The red LED next to the button lights up.
3.
Select the chase you want to add a step to.
4.
Use the Mode/Up (
19
) and Patch/Down buttons (
20
) to scroll through the chase. The display will show
the current step.
5.
Select the fixture you want to program by pressing the desired Fixture button (
1
).
6.
Set the 8 faders (
5-12
) to the desired values.
7.
Press the Record button (
15
) to save a new step. All LEDs will flash 3 times, indicating your operation
has been successful. The new step will be added
after
the selected one.
8.
If you want to add additional steps repeat 5, 6 and 7, until you have added all the desired steps in
your entire chase.
9.
Turn OFF the Chase, by pushing the Chase button to deselect the chase.
10.
Exit Record Mode by pressing the Record button (
15
).
One Chase can contain a max. of 1740 steps
16 chases can contain a total of 1740 steps
4.6
Delete a Step from an existing Chase
1.
Press and hold down the the Record button (
15
) for 3 seconds to enter Record Mode.
2.
The red LED next to the button lights up.
3.
Select the chase from which you want to delete a step.
4.
Use the Mode/Up (
19
) and Patch/Down buttons (
20
) to scroll through the chase and select the step
you want to delete.
5.
Push the Tap Sync button (
16
) to delete the step.
6.
All LEDs will flash 3 times, indicating the step has been successfully deleted.
7.
Continue this procedure (steps 3, 4 and 5) if you want to delete multiple steps. If you are finished
deleting the steps, press the Record button (
15
) to exit Record Mode.
Содержание 50725
Страница 1: ...LED Commander Pro V2 ORDERCODE 50725...
Страница 19: ......
