10
1.3 MIDI
1.
Press and hold the Patch/Down button (
20
) for 3 seconds to enter Patch Mode.
2.
The red LED next to the button lights up.
3.
Press the Tapsync button (
16
), until the display shows .
4.
Use the
Speed
slider (
22
) to choose your desired
MIDI channel
.
5.
You can choose 16 different MIDI channels.
6.
Press the Record button (
15
) to save your adjustment. All LEDs will flash 3 times, indicating your
operation has been successful.
7.
Press and hold the Patch/Down button (
20
) for 3 seconds to exit Patch Mode.
1.4 AUX
1.
Press and hold the Patch/Down button (
20
) for 3 seconds to enter Patch Mode.
2.
The red LED next to the button lights up.
3.
Press the Tapsync button (
16
), until the display shows .
4.
Use the
Speed
slider (
22
) to select
065 AUX1
or
066 AUX2
.
5.
Press the Tapsync button (
16
), until the display shows .
6.
Use the Speed slider (
22
) to choose
Latch
or
Flash
.
7.
Press the Record button (
15
) to save the patch.
8.
Press and hold the Patch/Down button (
20
) for 3 seconds to exit Patch Mode.
1.5 Patch more than ONE DMX Channel to the same slider
1.
Press and hold the Patch/Down button (
20
) for 3 seconds to enter Patch Mode.
2.
The red LED next to the button lights up.
3.
Press the Tapsync button (
16
), until the display shows .
4.
Use the
Speed
slider (
22
) to select the Fixture you want to patch.
The displays above the 8 sliders (
5-12
) show the DMX addresses and with the 8 Sliders below you can
patch the slider of a Fixture to multiple DMX addresses.
If you want to patch DMX address 1, 2, 3 and 4 to slider 1, change the sliders below the display to:
001 f1s1
002 f1s1
003 f1s1
004 f1s1
5.
Press the Record button (
15
) to save the patch. All LEDs will flash 3 times, indicating your operation
has been successful.
6.
Press and hold the Patch/Down button (
20
) for 3 seconds to exit Patch Mode.
The Audio Slider has no function in Patch Mode
2.
Factory Reset
1.
Press the Record button (
15
) and enter Program Mode. The red LED next to the button lights up.
2.
The display shows .
3.
Now press and hold the Record (
15
) Tap Sync (
16
) together for 10 seconds.
4.
Release the 2 buttons and wait for 15 seconds. All LEDs will flash 3 times, indicating your operation has
been successful. The LED Commander Pro is now back to its original factory default settings.
After the factory reset, the fixture is auto patched
Содержание 50725
Страница 1: ...LED Commander Pro V2 ORDERCODE 50725...
Страница 19: ......
