SHOWTEC 50706, Руководство пользователя

Страница: 32 / 36

31
ColorCue 4
Product code: 50706
Playback Mode
In this mode you can play back the recorded scenes/chases.
The playback mode screen provides information about the selected PLAYBACKS button number, the
total number of steps in the chase, the step which is being played, the playback speed of the chase in
bpm (beats per minute) and the fade percentage.
Press the MODE button (56) repeatedly until the LED on the button lights up in green to activate playback
mode.
There are 2 playback options. Press the AUTO/SOUND button (59) to toggle between automatic and
sound-controlled playback.
● Auto playback: The LED on the button will light up in red. The chase will play automatically.
● Sound-controlled playback: The LED on the button will light up in green. The chase will play
automatically reacting to the beat of the music. Turn the SOUND control (H) to adjust the sensitivity of
the built-in microphone. Make sure that the parameter selection mode is enabled. See 6.5.1.2.
Parameter Selection Mode on page 19 for more information.
You can additionally select between single chase play and multiple chase play. Press the SINGLE/MIX
button (61) to toggle between the two options.
● Single: The LED on the button will light up in red. If this option is enabled, only one chase will be
played back at a time.
● Mix: The LED on the button will light up in green. If this option is enabled, you can select multiple
chases to be played back simultaneously.
Slide up the fader(s) (01)–(48) of the chase(s) you want to play back. The respective LED(s) above the
fader(s) will light up and the selected chase(s) will be played back. The LED(s) on the respective
PLAYBACKS button(s) (01)–(48) are blinking during playback.
During playback you can add strobe effect. Make sure that parameter selection mode is enabled. See
6.5.1.2. Parameter Selection Mode on page 19 for more information. Turn the STROBE control (I) to add
strobe effect. The adjustment range is from OFF to FULL, from low to high frequency.
Factory Reset
Press and hold down the RECORD button (60), the DELETE button (64) and the CLEAR button (68)
simultaneously for 3 seconds to reset the LED controller to the factory settings. The LEDs on all buttons will
blink 3 times.
All programmed scenes and chases will be deleted and the fixture type will return to its default setting:
RGBWA-UV.