30
ColorCue 4
Product code: 50706
Insert a Step in a Chase
Fig. 24
01)
In programming mode, press and hold down the INSERT button (62) for 3 seconds. The LED on the
button will light up.
02)
Press the PLAYBACKS button (01)–(48) for which you want to insert a step in the chase. The LED on the
button will start blinking. The PLAYBACKS button number will be displayed on the screen.
03)
Press the LEFT/RIGHT buttons (50)/(51) to select the place at which the new step will be inserted in the
chase.
Note:
If you select step 01/05, the new step will become step 01 and the rest of the steps will be renumbered
automatically. When you finish creating the new step, the screen will show 01/06. If you select 06/05, it
means that the new step will be added at the end as step 06 to the chase.
04)
Press the INSERT button (62) again. The LED on the button will start blinking.
05)
Create a new scene:
●
Double (24-fixture) mode – follow steps 3–8 from 6.6.1. Create a Scene in Bank A on page 21. The
concept of Bank A and Bank B is not applicable in programming mode. Therefore the
connected fixtures can be selected only with the FIXTURES buttons and faders (01)–(24).
●
Single (48-fixture) mode – follow steps 3–8 from 6.6.4. Create a Scene on page 23.
06)
Press the UPDATE button (66) to insert the new step. The LED on the button will light up. When you
release the button. the LED will turn off. The LEDs on all buttons on the device will blink 3 times to
confirm that the update is completed.
Содержание 50706
Страница 13: ...12 ColorCue 4 Product code 50706 Dimensions Fig 05 Fig 06 Mounting Dimensions Fig 07...
Страница 36: ...2021 Showtec...
