SHOWTEC 50706, Руководство пользователя

Страница: 17 / 36

16
ColorCue 4
Product code: 50706
6. Operation
Safety Instructions for Operation
Attention
This device must be used only for the purposes it is designed for.
This device is intended for use as a LED DMX controller. It is suitable only for indoor installation. It is not
suitable for households.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Start-up
The device has a power switch.
● Press the power switch (V) in ON position to turn on the ColorCue 4.
● Press the power switch (V) in OFF position to turn off the ColorCue 4.
Setup Mode
In this mode you can select the type of the LEDs of the connected lighting fixture(s) and the MIDI address
of the device.
The setup mode screen provides information about the MIDI address of the device, the LEDs type of the
connected fixtures, the starting DMX address of the last connected fixture, whether the default settings of
the fixtures are active, and the firmware version.
01) Press and hold down the SETUP button (53) for 3 seconds to enter setup mode. The LED on the button
will start blinking.
Refer to 6.3.1. LEDs Type Setup on page 17 and to 6.3.3. MIDI Address Setup on page 18 for more
information about the available settings in this mode.
02) Press and hold down the SETUP button (53) for 3 seconds to exit setup mode. The LED on the button
will stop blinking.