SHOWTEC 40292, Руководство пользователя

Страница: 11 / 24

10
Ordercode: 40292
Ignitor-6 Section Strobe
Multiple Ignitor-6 Section Strobe (DMX Control)
01)
Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Plug the end of the electric mains power cord into a proper electric power supply socket.
03) Use a 3-pin XLR cable to connect the Ignitor-6 Section Strobes and other devices.
04) Link the units as shown in fig. 04. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX-signal cable. Repeat this process to link the second, third, and fourth units.
05)
Supply electric power: Plug the other end of the mains power cord into proper electric power
supply sockets, starting with the first unit. Do not supply power before the whole system is set up and
connected properly.
Multiple Ignitor-6 Section Strobes DMX Set Up
Fig. 04
Note : Link all cables before connecting electric power